Smart Business for Your Business.
Solid Hardwood Bookcases by Hale
Return Hale Directory

48 Series
200 Series
200 Showcase
300 Series
Lateral File
Vertical File

500 Series
Library Series
800 Series
1100 Series

Sliding and Hinged Door Options


754 Library Case
Free Shipping!

Hale Manufacturing 754 Library Case
  • Center divider
  • Locks
  • 5/8 inch solid wood shelves
  • Box and frame construction
  • Traditional 754 white oak or birch solid lumber veneers
Hale's 754 Library Case is handcrafted from solid Oak or Adirondack Birch lumber, this rugged library case is built to last from generation to generation. Large ornate brass keys are used as door pulls, or can be removed for security purposes. New to the 754 Library Case is the "Leg Base" . The "Leg Base" 754 is now the standard when ordering the Library Case. The standard case with leg base stands 56 5/8"H x 41"W x 12 5/8"D with an 18 3/4" opening on either side of the center partition. With a 10 1/2" shelf depth behind the doors. The original 754 with the box base is available and must be specified when ordering. The 754 with original box base stands 53"H x 41"W x 12 5/8"D. Additional construction details at bottom of page along with finish options for birch or oak woods only. Make choices prior to ordering since you will be prompted for choices when ordering. If walnut woods / finishes are desired, please see our Den Master Shelf series. Shelves are 10 1/2" deep
Birch   Oak
Hale Manufacturing Birch 3448
Hale Manufacturing Birch 41
Hale Manufacturing Birch 58
Hale Manufacturing Birch 8
Hale Manufacturing Birch B1
Hale Manufacturing Birch B@
Hale Manufacturing Oak 24
Hale Manufacturing Oak 47
Hale Manufacturing Oak 49
Hale Manufacturing Oak 4
Hale Manufacturing Oak 64

General Construction of the 754 Library Case:
All wood used in the construction of parts and shelving will be kiln-dried hardwood containing moisture content of 5% - 7% at the time of fabrication. All woods will be selected for uniformity of grain and color. Wood used for internal parts will be selected to be structurally sound.

Top and bottom are secured to the ends and vertical center partition by mortise and tennon securely glued. In addition, a lumber frame is used to secure the top to the ends. The top front molding being an integral part of this frame. The base is a complete 4 sided box recessed 1 ¼" in at front and ends. The two doors close against the vertical center partition, kept tight by magnetic catches and secured by a lock in each door. The large ornamental keys are used as door pulls. All doors are keyed alike. Bookcases are shipped completely trimmed and set up ready for use (except for placement of shelves). The two front corners are equipped with heavy adjustable height supports to equalize floor unevenness.
Wood Finishes:
In the manufacturing process, hardwood parts are glued, cut to size, machine and finish sanded on a 2-head wide belt-finishing sander. Hardwood veneer end panels are finish sanded on a Heesman automatic veneer panel sander. Finish sanding of veneer panels and hardwood parts include the use of 100, 120, and 150 grit-sanding belts.

After parts are assembled into a freestanding unit, final hand sanding and inspection prepared the unit for the first finishing step. The selected color finish is hand applied and cloth wiped to provide a uniform color.

One coat of sealer is applied with an airless sprayer and allowed to cure. After curing, the sealer is sanded with 220 grit sandpaper to provide a uniform smooth surface.

A final lacquer topcoat is applied with an airless sprayer and cured in a heated drying room. The topcoat dries smooth to approximately a 30-sheen finish, which is resistant to normal wear and scratching.
All cases are fully guaranteed against defects in material and workmanship for 1year.
FREE Freight Service is Dock-to-Dock in US 48 for orders more than 300lbs. For lift gate and/or inside delivery or for residential service, please select the freight option for this service in the shopping cart. For orders under 300 lbs. a freight charge of $40 will be applied except for items shipped via UPS.
To ADD TO CART, Click on Item Price.
Item Code Shelves:: Height: LBS Price
754 - Leg Base 3 56 5/8" 145 $ 2,062
754 - Box Base 3 56 5/8" 145 $ 2,062
754 - Shelves Pair of Additional Shelves - - $ 50
754 - Panel Doors Substitute Wood Panel Doors - Set of Two - -

$ 60

Valid XHTML 1.0 Transitional       
Valid CSS!