 |
Integrated Screen Control (ISC) Generation II
Da-Lite’s line of Integrated Screen Control (ISC) products has been expanded to include a multi-position RS-232 control for electric screens. This multi-position screen control offers infinite height adjustment and multiple aspect ratio control of Da-Lite’s Contour, Advantage, Advantage Deluxe and Director Electrol models. For example, the SCB-200 allows the screen to “raise by four inches” or to go to a different aspect ratio. This new, broader line of products is based upon RS-232 control with the SCB-200 and can be expanded to include such options as Ethernet control with the NET-200, push button wall control with the WC-200 and infrared control with the IR-200.
Click here for more information and ordering. |
 |
CONTROL SWITCHES |
Part # |
White Three Button Low Voltage Control Switch (Standard) |
80575 |
| Ivory Three Button Low Voltage Control Switch |
discontinued |
White Low Voltage Control Switch - (For Screens With Built-In LVC) |
38886 |
| Ivory Low Voltage Control Switch - (For Screens with Built-In LVC) |
38955 |
|
|
Key Operated, 110 Volt Switch
Flush-mounted wall control switch is key activated for security.
Use with 115 volt systems only.
White cover plate.
Description |
Weight |
Part # |
| Key-Operated Switch For 115V Only |
1 lb. |
74490 |
|
|
Locking Switch Cover Plate
Hinged cover plate installs over the top of standard wall switch.
Opens with a key to allow access to 110 volt switch or Low Voltage Control 3-button wall switch.
Brushed stainless steel finish.
Description |
Weight |
Part # |
| Key Locking Coverplate For 115V Switch or LVC |
0.5 |
40962 |
|
|
Video Projector Interface
12 VDC or 5 VDC control allows screen to be raised or lowered automatically when projector, with 12 volt or 5 volt lead, is turned on or off.
Includes complete box with rocker switch for manual operation and cover plate.
Projector must have 12 volt or 5 volt lead to operate interface.
Description |
Weight |
Part # |
| Video Projector Interface - 115V with Switch |
3 |
99622 |
|
|
Replacement Wall Switch
110 volt replacement wall switch for all single motor electric screens.
Available in white (standard) or ivory.
Description |
Weight |
Part # |
| White Replacement Wall Switch. 115V (Standard) |
1 lb. |
80575 |
Ivory Replacement Wall Switch. 115V |
1 |
40961 |
Stainless Steel Replacement Wall Switch - Substitute for Standard Switch - (must be ordered with screen) |
1 |
92055 |
|
|
Laser Pointers
The ultimate in presentation convenience.
Select from three models:
- Standard Laser Pointer
- Blinking Laser Pointer
- Jumbo Laser Pointer
| CEILING TRIM KITS - FOR COSMOSPOLITAN® CONTOUR®AND TENSIONED |
| |
Weight |
Part # |
Laser Pointer, Green - with batteries |
1 |
35246 |
Blinking Mode Laser Pointer, Red |
|
1 lb. |
79899 |
| RF Power Remote with Green Laser Pointer |
5 |
37139 |
|
|
Floating Mounting Bracket for Cosmopolitan and Tensioned Cosmopolitan Electrols
Optional floating mounting brackets allow the Cosmopolitan® to be mounted onto wall or ceiling studs and aligned left or right after installation by releasing two sets of screws.
Available in black or white or a veneer finish (upon request).
Description |
Weight |
Part # |
| Cosmopolitan White Floating Mounting Bracket |
6 |
77027 |
Tensioned Cosmopolitan Black Floating Mounting Bracket |
6 |
77028 |
|
|
Ceiling Trim Kit for Cosmopolitan Screens
The Ceiling Trim Kit enables the Cosmopolitan® to be easily recessed into a drop ceiling. Mounted to the end caps with the included mounting hardware, the Ceiling Trim Kit provides a uniform slot in the ceiling for the screen to drop from. The Ceiling Trim Kit is available for use with both tensioned and non-tensioned versions of the Cosmopolitan® in sizes up to 9’ x 12’.
| CEILING TRIM KITS - FOR COSMOPOLITAN® AND TENSIONED COSMOPOLITAN |
Part # |
For screens 8' wide and under |
96382 |
| For screens over 8' wide up to 10' wide |
96383 |
For screens over 10' wide up to 12' wide (except 12'x12') |
96384 |
|
Electric Screens 
