- Protek II
- High Contrast tint
- Factory mounted aluminum frame
DA-LITE'S POLACOAT® DA-PLEX™ IN-WALL REAR PROJECTION SCREENS
SUGGESTED SPECIFICATIONS:
Rear projection screens shall be Da-Lite's Polacoat In-Wall DA-PLEX, type VIDEO VISION, DA-100, DA-150, DA-180, DA-230 in thickness of 1/4" or 3/8" or 1/2" as manufactured by Da-Lite Screen Company, Inc., Polacoat Division, Blue Ash, Ohio. The screen substrate shall be clear acrylic plastic. The substrate shall have an optical coating on one surface not exceeding .004" in thickness. The height and width dimensions shall be as detailed with tolerances of + .125" for 1/4", + .250" for 3/8", or + .375" for 1/2".
NOTES:
- Da-Plex rear projection screens shall be mounted with the coated surface toward the audience.
- Job site installation and framing shall conform to manufacturer's recommendations.
- Da-Plex screens cannot be cut in the field.
OPTIONAL EXTRAS:
- Protek II
- High Contrast tint
- Factory-mounted aluminum frame
BUTT EDGES
- When a multiple screen installation is chosen, it is required that the surface butt edges be custom prepared. This is a special process. Contact our Sales Department for complete information.
SIZES AND TOLERANCES
- Da-Lite's Polacoat rear projection screens are made to the exact dimensions requested by the purchaser plus or minus (+) the following standard tolerances. The user must allow for any space between the screen and the opening that would be required for proper mounting.
THICKNESS: 1/4"
- DA-GLAS: + .125
- DA-PLEX: + .125
THICKNESS: 3/8"
- DA-GLAS: + .250
- DA-PLEX: + .250
THICKNESS: 1/2"
- DA-GLAS: + .375
- DA-PLEX: + .375
MAINTENANCE
- Da-Lite Rear Projection Screens, glass or acrylic, are designed for a long, useful life. Properly installed and cared for, they will produce high quality images for many years. Listed below are recommended methods to clean, handle and repair optical panels. Repair of damage not described herein should be discussed with our Sales Department. Liability and risk in cleaning or repairing rear projection screens are assumed by the user.
CLEANING
- Da-Lite Lenskleen Cleaner is especially formulated to clean Da-Lite's Polacoat rear projection screens.
- Remove dust by gently washing the screen with a soft cloth and mild solution of dishwashing liquid and water. Rinse with clear water and blot dry.
- Do not use abrasive cleaning agents, solvents, commercial cleaners, or ammonia cleaning solutions.
REPAIR
- Slight scuffs and scratches on screens may be removed by cleaning the area thoroughly with mild soap and water. A light application of mineral oil on scratch marks will seal slight damage.
HANDLING
- Upon receipt of crates inspect immediately for concealed damage
- Keep screens in shipping cartons until used. Store in a dry area between 40°F and 100°F.
- Screens, cartons, and crates should always be stored and handled in an upright position. Never lean or stack them flat.
- Cotton gloves are recommended for safe handling. Handle screens by edges.
- Installation locations should always be cleaned and free of any objects or solvents which could fall onto the surface of the screen.
SCREENS WITHOUT FRAMES
- Screens can be ordered without frames and framed with wood, plastic or metal on site.
- Large Da-Plex screens should be installed so weight is suspended from the top.
- All construction, painting and finishing should be completed before installation to reduce the chance of damage to the optical surface.
- It is recommended that installation of unframed screens be handled by experienced glaziers.
- Detailed installation instructions accompany each screen.
SCREENS WITH FRAMES
CUSTOM SIZES
- Da-Glas and Da-Plex screens are available in a wide range of custom sizes.
- Screens over 8-feet high require the use of a special contract carrier.
When Ordering Make Appropriate Selections:
- Select Viewing Surface:
- Suggested Specifications:
SUGGESTED SPECIFICATIONS:
DA-LITE’S POLACOAT® DA-PLEX™
IN-WALL REAR PROJECTION SCREENS
Rear projection screens shall be Da-Lite’s Polacoat In-Wall
Da-Plex™, Type DA-100, DA-150, DA-180, DA-230 or Video
Vision in thicknesses of 1/4", 3/8" or 1/2" as manufactured by
Da-Lite Screen Company, Inc., Polacoat Division, Blue Ash, Ohio.
The screen substrate shall be clear acrylic plastic. The substrate
shall have an optical coating on one surface not exceeding .004"
in thickness. The overall size of the acrylic panels shall be as
detailed with tolerances of ±.125" for 1/4" or ±.250" for 3/8" or
±.375" for 1/2".
NOTES:
Da-Plex™ rear projection screens shall be mounted with the
coated surface toward the audience.
Job site installation and framing shall conform to manufacturer’s
recommendations.
Da-Plex™ screens cannot be cut in the field.
OPTIONAL EXTRAS:
❑ High Contrast Tint
❑ Factory mounted aluminum frame
DA-GLAS™
SUGGESTED SPECIFICATIONS:
DA-LITE’S POLACOAT® DA-GLAS™
IN-WALL REAR PROJECTION SCREENS
Rear projection screens shall be Da-Lite’s Polacoat In-Wall
Da-Glas™, Type DA-100, DA-150, DA-180, DA-230 or Video
Vision in thicknesses of 1/4", 3/8" or 1/2" as manufactured by
Da-Lite Screen Company, Inc., Polacoat Division, Blue Ash, Ohio.
The screen substrate shall be clear float glass. The substrate
shall have an optical coating on one surface not exceeding .004"
in thickness. The overall size of the glass panels shall be as
detailed with tolerances of ±.125" for 1/4", ±.250" for 3/8" or
±.375" for 1/2".
NOTES:
Da-Glas™ rear projection screens shall be mounted with the
coated surface toward the audience.
Job site installation and framing shall conform to manufacturer’s
recommendations.
Da-Glas™ screens cannot be cut in the field.
OPTIONAL EXTRAS:
❑ High Contrast Tint
❑ Factory mounted aluminum frame
- Options:
- High Contrast Tint.
- Optional Light Baffle: Zero Gap - available on Da-Plex 3/8" thick panels up to 60" high and 1/2" panels up to 84" high.
- Optional Light Baffle: T-Mullion - available in 1/4" thick panels up to 60" high.
- Optional Factory Installed Frames: Deluxe Frame (All thicknesses up to 10' x 20'); Standard Frame (1/4" and 3/8" only); Base Frame (1/4" only; Da-Plex to 6' x 8'; Da-Glas to 4' x 5'); Self Trimming (up to 9' x 16')
- Protek II
